UHMWPE Fender Facial pads for Marine rubber fender

Category:

所属分类： UHMWPE Fender Pads

Summary：Shandong Ningjin Xinxing Chemical Co.,ltd is the leading manufacture for UHMWPE Fender Facial pads and we supply our UHMWPE Fender pads to many big fender companies. Xinxing can provide both virgin and recycled UHMWPE fender pads as per different customer requirements.

Product consultation：

0086 18263036307

Leave a message online

Detailed description

Shandong Ningjin Xinxing Chemical Co.,ltd is the leading manufacture for UHMWPE Fender Facial pads and we supply our UHMWPE Fender pads to many big fender companies. Xinxing can provide both virgin and recycled UHMWPE fender pads as per different customer requirements.

UHMW-PE Fender pads and fenders are produced by a sintering process either from virgin or from reclaimed material (aprox. 70% reclaimed +30% virgin material - also named double-sintered or blended UHMW-PE).
UHMW-PE (UltraHighMolecularWeight-PolyEthylene) combines highest strength with wear resistance and consequently provides the best durabilty of all available Polyethylene products.

The UHMW-PE Fender pads application is as follows:
● low resistance sliding plates on fender panels
● low resistance slinding panels for bridge and pier protection
● corner protection for offshore structures, berths and other marine facilities

The UHMW-PE Fender pads advantages are:
● Very high impact strength
● Very low friction coefficient
● Very high abrasion resistance
● UV + Ozone resistant
● Non-conducting (optional)
● 100% recycable, non-rottening
● Cut to size sheet ,all size is available with us
● Standard colour :Black ,Yellow ,Blue ,Green ,Red,White ,other colour is available upon request .

All kinds of UHMWPE Fender pads can be provided by us :

UHMWPE Corner pads UHMWPE Edge pads UHMWPE Flat pads

Below is our UHMWPE Fender pads specification (For special requirements ,please contact us):

Item	Test method	Unit	UHMWPE 1000-V	UHMWPE 1000-DS
Density	ISO1183-1	g/cm3	0.93-0.95	0.95-0.96
Yield Strength	ASTM D-638	N/mm2	15-22	15-22
Breaking Elongation	ISO527	%	undefined200%	undefined100%
Impact strength	ISO179	Kj/m2	130-170	90-130
Abrasion	ISO15527	Steel=100	80-110	110-130
Shore Hardness	ISO 868	Shore D	63-64	63-67
Friction Coefficient(Static state)	ASTM D-1894	Unitless	undefined0.2	undefined0.2
Operating temperature	-	℃	-80 to +80	-80 to +80